 |
|
Sales & Support
Vraag een offerte aan - Email
Select Language
|
|
|
Ik ben online Chatten Nu
Russia 52H / Glass Sealing52 Vacodil 520 Pipe / Tube 10mmx1mm large in stock
|
Productdetails:
Betalen & Verzenden Algemene voorwaarden:
|
Gedetailleerde productomschrijving
| Norm: | ASTMB166 | Oppervlakte: | Bright&Block |
|---|---|---|---|
| OD: | 0.2~80mm | Muur: | 0.01~10mm |
| Lengte: | 0.2~6000mm | Ambacht: | Koude Tekening |
| vorm: | Buis | Algemene naam: | FeNi52 |
| Toepassing: | Glas het verzegelen | Ni%: | 51.5~52.5 |
| Markeren: | Glasverzegelingspijp 52H,10 mmx1 mm 52H buis,10 mmx1 mm 52H buis |
||
52H Glass Sealing52 Vacodil 520 Pipe 10mmx1mm large in stock
Product Description
The iron-nickel fixed expansion alloy is a series of fixed expansion alloys that can be matched with soft glass and ceramics with different expansion coefficients in a given temperature range by adjusting the nickel content. The expansion coefficient and Curie point increase with the increase of nickel content. This combination gold is a widely used sealing structure material in the electric vacuum industry
Chemical Composition
| Grade | C% | P% | S% | Mn% | Si% | Cu% | Cr% | Mo% | Ni% | Co% | Fe% |
| Alloy52 | Max 0.05 | Max 0.020 | Max 0.020 | Max 0.80 | Max 0.30 | / | / | / | 51.5~52.5 | / | Bal. |
Specifications
| Grade | Common Name | Common Name |
| Alloy | Vacodil520 | NILO 52 |
Physical Properties
| Grade | Density | Resistivity |
| Kovar | 8.25 g/cm3 | 0.43 |
Grain size of Alloy52
The grain size of the alloy deep-drawing belt should not be less than level 7, and the grain size less than level 7 should not exceed 10% of the area. When the average grain size of the strip with a thickness of less than 0.13mm is estimated, the number of grains along the thickness of the strip should be no less than 8.
Welding performance of Alloy52
The combined gold has good welding performance and can be brazed and spot welded. The combination of gold and soft glass should be pre-oxidized before sealing.
Coefficient of Expansion
| Alloy | Linear Coefficient of Thermal Expansion a,10-6/°C | |||||||
| 20-200°C | 20-300°C | 20-350°C | 20-450°C | 20-500°C | 20-600°C | 20-700°C | 20-800°C | |
| Kovar | 10.4 | 10.2 | 10.3 | 10.3 | 10.3 | 10.8 | / | / |
Heat Treatment For Alloy52
(1) Stress relief annealing In order to eliminate the residual stress of parts after machining, stress relief annealing is required: 430~540℃, heat preservation 1~2h, furnace cooling or air cooling. [1]
(2) Intermediate annealing In order to eliminate the work hardening phenomenon caused by the alloy in the process of cold rolling, cold drawing and cold stamping, in order to facilitate the continued processing. The workpiece needs to be heated to 700~800℃ in a vacuum or protective atmosphere for 30~60min, then furnace cooled, air cooled or water quenched.
(3) Pre-oxidation treatment When the combined gold is used as a sealing material, it should be pre-oxidized before sealing. A uniform and dense oxide film is formed on the surface of the alloy. The parts are heated in saturated wet hydrogen at 1100°C for 30 minutes, and then oxidized in the air at about 800°C for 5-10 minutes. The weight gain of the parts should be 0.1~0.3mg/cm2
Company Profile
Customer Photos
Exhibition
Production Process
Testing Equirement
Shipment
Contact Us
Contactgegevens
Ohmalloy Material Co.,Ltd
Contactpersoon: Jully
Tel.: +8617301602658
Direct Stuur uw aanvraag naar ons
Meer legeringen op hoge temperatuur
-
De Bar van de Inconel625nicr22mo9nb Rod High Temperature Corrosion Resistance Legering
-
Bright and Black Surface Inconel 625 Bar As ASTM B166UNS N06625 DIN 2.4856
-
Wholesale Inconel625 NiCr15Fe W .N r.2.4856 29mm～450mm Inconel 625 nickel rod/bar by ASTM B160
-
High Temperature Alloy Inconel 625 (UNS N06625) Size 20～350mm in stock for sell.
-
Cold drawing Inconel 600 UNS N06600 Rod 5mm~25mm With bright Surface ISO NiCr15Fe8 Alloy
-
De hete Smeedstukstaaf/legering van het Nikkelchromium nicr 80/20 nichromestaaf/bar voor het verwarmen van Toepassing